Programming your telephone
8.1 Initializing your voice mailbox
• Light flashes.
•
• Enter your personal code then record your name according to voice guide instructions.
Your personal code is used to access your voice mailbox and to lock your telephone.
A weak personal code will be rejected by the system:
• Identical 4 digits (0000, 1111,).
• A simple sequence of 4 digits (0123, 1234,).
Make sure you choose a strong password with at least 4 digits.The list of weak passwords provided does
not contain all the possibilities.
8.2 Customizing your voice greeting
You can replace the greeting message by a personal message.
•
• Voice mail / new voice message / new voice messages
• Enter your personal code.
• Perso options Greeting msg Perso greeting Record message.
• End End of recording.
• Use one of the following:
o Accept Apply.
o Restart Re-record a message.
o Replay Replay message.
To return to the default message.
• Normal prompt
8.3 Modify the password for your phone set
• Reach the 'Menu' page.
• Settings Phone Password
• Old code (4 digits).
• Apply
• New code (4 digits).
• Apply
• Enter new password again to confirm.
• Apply
•
This code acts as a password controlling access to programming functions and the user 'Set Locking '
function (code by default: 0000).
A weak personal code will be rejected by the system:
• Identical 4 digits (0000, 1111,).
• A simple sequence of 4 digits (0123, 1234,).
Make sure you choose a strong password with at least 4 digits. The list of weak passwords provided
does not contain all the possibilities.
To Next Page
Loading...
