To configure your deskphone:
• Connect your deskphone to the network (and plug in the power jack if you are using an external
power adapter).
• When the deskphone displays the 'Step 2' during the boot, repeatedly press the '*' and '#' keys in
succession until a menu is displayed.
• VPN (Scroll down the menu).
o VPN Config
▪ Enter the new PIN Code.
▪ Validate.
▪ 123<>abc: Switch the keyboard to the alphabetic mode when you have to enter
text.
▪ Enable VPN: you have to activate this option to use your deskphone for
teleworking.
▪ Server: enter the address of the VPN server.
▪ PSK: enter the pre-shared key to establish a secure connection with the VPN
server. The PSK can be unique for all remote workers on a same installation or
can be specific to each remote worker. In the first case, the VPN authentication
has to be enabled.
o VPN Tftp Use TFTP servers, tftp1, tftp2,port: if the TFTP servers are required, activate
this option and enter the addresses and port of the TFTP servers.
o VPN Auth Use Authentification, User, Pass: activate this option if a logon to the VPN
server (username and password) is required. The VPN authentication can be disabled in
case a specific PSK is used for each remote worker.
o VPN Pincod Request Pin on Boot: if this option is activated, the PIN code is required
when you boot your deskphone. We recommend you activate this option.
o Select this icon to return to the main menu.
o Select this icon to save parameters.
• The VPN configuration is saved and the main menu is displayed.
• select this icon to exit the configuration menu. The deskphone restarts.
• Enter the PIN code if you have selected the option (Request Pin on Boot).
• Validate.
• Your deskphone is ready for teleworking.
If you leave the PIN code request menu when the phone is starting, the phone will start without VPN
activated.
To Next Page
Loading...
