2.3 Making a call
Use one of the following:
Dial directly the number for your call.
Lift the receiver Enter the destination number.
Press the on-hook/off-hook key of the Bluetooth® device (Bluetooth® Wireless handset)
Dial the destination number.
Hands free Dial the destination number.
Programmed line key.
Dial by name (enter the first letters of the contact's name on the alphapad and press OK to start
the search).
From call log after accessing the messaging portal.
Redial last number.
To make an external call, dial the outside line access code before dialing your contact number.
The duration of your external call may be limited in time by the administrator. In this case, a beep sounds
and/or a message will be displayed on the screen 20 seconds before the end of the communication.
2.3.1 If the internal or outside number does not reply
Use one of the following:
Interphony: Broadcast a message on the loudspeaker of the free terminal.
¤Callback: Request callback to a busy terminal.
Text: Send a written message.
2.4 Receiving a call
When receiving a call, you can:
Lift the receiver to take the call.
/ / Press the 'take the call', 'loudspeaker' or 'line key' key to take the call in
handsfree mode.
Press the On-Hook/Off-Hook key on the Bluetooth handset to take the call (if handset is not
on-hooked) - Bluetooth® Wireless handset.
Select the incoming call icon. With the touchscreen, selecting the icon displays
information about the incoming call, you can touch near the icon (external free area) to answer
the displayed call directly.
Answer
To Next Page
Loading...
