2.5 Using the telephone in 'Hands free' mode
2.5.1 Terminal idle
Press and release You are in hands free mode.
Terminate your call.
2.5.2 Call in progress
During a conversation
Press and release You are in hands free mode.
During a conversation, you can lift the receiver without terminating the call.
2.6 Activating the loudspeaker during a conversation (handset lifted)
During a conversation.
Activate loudspeaker The key lights up.
Adjust volume by pressing the volume keys (number of levels: 7).
Deactivate loudspeaker The key is no longer lit.
Press and release the loudspeaker key to switch to hands free mode (light steady).
2.7 Calling a contact using the search by name feature
You can call a contact using the search by name feature. This feature enables you to call a contact
directly on their company phone or call them on another phone using their contact card.
The search by name feature provides two modes:
Internal: Classic search of the corporate directory.
Unified: Predictive search of the corporate directory.
Please be aware that predictive searching means that you won't have access to the contact card,
and therefore can only call the contact on their company phone.
Switching between the two modes:
Press a letter to launch the dial by name function.
Options
The current mode is displayed.
Select the new mode:
o Internal: The internal directory mode is enabled.
o Unified: The unified directory mode is enabled.
o OK: Stay in the current mode.
2.7.1 Calling a contact using the unified directory
Enter the first letter of your contact's surname.
When entering the name you can extend the search by adding the first letters of the first name
after entering the '#' symbol or pressing: 1stname
Start the search.
A list of matching names is displayed on the screen. Each contact is displayed with their name
and company phone number.
To Next Page
Loading...
