7 Programming your telephone
7.1 Initializing your voice mailbox
Light flashes.
Enter your personal code then record your name according to voice guide instructions.
Your personal code is used to access your voice mailbox and to lock your telephone.
Your password has 6 digits. A weak personal code with 6 identical digits (000000, 111111, etc.) or a
simple sequence of 6 digits (012345, 123456, etc.) will be rejected by the system. After a system
upgrade, the password may still have only 4 digits. For security reasons, we recommend you use a
password with 6 digits. Contact your installer for more information. The list of weak passwords provided
does not contain all the possibilities.
7.2 Customizing your voice greeting
You can replace the greeting message by a personal message.
Reach the 'Menu' page.
Settings Mailbox
You can listen to the greeting, customize the greeting and set the default greeting (Listen,
Recordname, Default).
You can replace the greeting message by a personal message (Persmessage).
You can pause, resume or stop the recording at any time.
7.3 Modifying your personal code
Reach the 'Menu' page.
Settings Options Password
Old code (6 digits).
New code (6 digits).
As long as your voice mailbox has not been initialized, personal code is 1515.
Your password has 6 digits. A weak personal code with 6 identical digits (000000, 111111, etc.) or a
simple sequence of 6 digits (012345, 123456, etc.) will be rejected by the system. After a system
upgrade, the password may still have only 4 digits. For security reasons, we recommend you use a
password with 6 digits. Contact your installer for more information. The list of weak passwords provided
does not contain all the possibilities.
To Next Page
Loading...
