Use one of the following:
o Scroll and select your contact in the list of matching names.
o / Modify the search.
Call your contact using the company phone number
Press the softkey associated with the company phone number.
Call your contact using another phone number (via contact card):
Press the softkey associated with the contact name:
The contact card opens and displays information about the contact: last name and first name, several
phone numbers (Office, mobile, home), email address, instant message address and the company
name.
Scroll through the screen with the up and down navigation keys and position the cursor on the
contact phone number you wish to call.
Start the call.
From the contact card you can also send an instant message.
You can change the search by name function to predictive search mode by setting the unified directory
to 'Off' in the settings menu (available once a search by name is started). Please be aware that
predictive searching means that you won't access the contact card and therefore can only call the
contact on their company phone and connot send instant messages.
2.7.2 Calling a contact using the internal directory (predictive search)
Enter the first letter of your contact's surname. You enter your contact 's name in predictive text
mode. In this mode, enter each letter of the name by pressing only once on the key with this
letter.
The search runs as soon as you enter a character (predictive search). The matching names are
displayed.
Use one of the following:
o Display the previous and next names.
o Press the OK key to start the call with the displayed contact (company phone
number).
o / Modify the search.
You can switch to the other search mode by enabling it in the options menu (available once a search by
name is started).
This feature depends on the system configuration. If necessary, contact your administrator...
2.8 Make calls via your programmed call keys (Perso page/Add-on module)
If you have programmed a direct call key, select it to make the call.
To Next Page
Loading...
