10
The device name displayed is the name shown on the screen of that Alcatel Lucent 8135S
phone. (This text can be altered. See SCREEN and text settings in the administration manual
for the Alcatel Lucent 8135S).
When you select the Alcatel Lucent 8135S that you want to connect, a pairing code will be
displayed. Enter the code via the keypad on the conference phone and press OK. Pairing will
then start. When the devices are paired, the Unite connection symbol will be displayed in
both ALE Unite and the Alcatel Lucent 8135S.
ALE Unite and the Alcatel Lucent 8135S will remain paired while they are close to one
another and are being used. A connection breaks after 5 minutes of inactivity, i.e. when no
call is being held. The connection range is up to 20 metres, approximately, depending on the
setting. The connection breaks if this range is exceeded.
You will be asked to reconnect when ALE Unite next comes within range of the
Alcatel Lucent 8135S. One touch is all it takes to reconnect.
You can disconnect manually via the conference phone and the app.
Via the Alcatel Lucent 8135S:
Select: MENU > UNITE > DISCONNECT > conrm with OK.
Via ALE Unite:
Click on the Unite connection symbol in the upper left-hand corner of the screen and select
disconnect from the highlighted device.
Up to 100 mobile phones or tablets can be paired with a Alcatel Lucent 8135S. Note
however: Only one user at a time can be actively connected to the conference phone!
The number of paired mobile devices is displayed under the status menu in the
Alcatel Lucent 8135S.
Select: SETTINGS > UNITE > STATUS
The pairing can be deleted from the conference phone.
Select: MENU > UNITE > DELETE DEVICE or DELETE ALL DEVICES.
Symbol for Unite
connection
USE WITH ALE UNITE
To Next Page
Loading...