Alcatel-Lucent 8135S - USING THE WEB INTERFACE

41
You can use the web browser of a PC connected to the same network to manage contacts,
conference groups and settings in the Alcatel Lucent 8135S.
 Your choice of language for the Alcatel Lucent 8135S does not affect the web interface,
which is only in English.
For security reasons, recordings can only be managed directly on the Alcatel Lucent 8135S.
All other settings that can be made directly on the Alcatel Lucent 8135S can also be made
via the web interface. It is also possible to import and export contacts and conference
groups, name user proles and change PIN codes, which can only be done via the web
interface. The administrator can also view logs, update software and create a conguration
le.
Settings for accounts and networks require you to log in as an administrator. However, you
can always check all settings as a user. Settings that require administrator rights are listed in
“Installation and Administration of Alcatel Lucent 8135S” (in English only).
The default setting for the PIN code is 0000 for the user account (Default, Prole 1, Prole
2, Prole 3 and Prole 4). We recommend that you change the PIN codes in order to protect
the settings. The code may consist of eight digits. The administrator can always view and
change the PIN codes to the user accounts. The administrator’s PIN code can only be reset
with a complete reset to factory settings.
CHECKING NETWORK ADDRESSES
You must use the network address to log into the web server in the Alcatel Lucent 8135S.

Press MENU and select the menu option STATUS > NETWORK (8,2).

Check the conference phone’s network address under the heading IP ADDRESS.
USING THE WEB INTERFACE