Alcatel-Lucent 8135S - RECORDING; Starting and Ending Recordings

30
It is possible to record a phone conference on an SD (Secure Digital) memory card so you
can listen to it later on. It is possible to record a call in progress and use the Alcatel Lucent
8135S as a dictaphone. The Alcatel Lucent 8135S supports SD and SDHC cards. Recording
capacity is 35 hours per GB.
A ashing symbol appears on the display screen during recording. A beep is heard every 20
seconds so that other parties in the call know it is being recorded. The beep can be turned
off (see page 33).
The recorded call is saved on the memory card. The document is named after the time at
which the recording began (e.g. 14-35-01.wav) and is saved in a folder with the current date.
This name can be changed after the recording has ended.
STARTING A RECORDING
Remember to notify all parties in the call before you start recording.

Press the
REC
/C button for two seconds and press OK to conrm.
The recording symbol ashes on the display screen.
MUTE FUNCTION

Press the button to turn the microphone off during a call.
The LEDs change from blue to red.
The other party cannot hear what you are saying and only the called party is recorded.
HOLD

Press during the call to put the call on hold.
The LEDs change from blue to ashing red.
Both the microphone and the speaker are turned off and the call is on hold. None of the parties will
now be recorded.
ENDING A RECORDING

Press the
REC
/C button for two seconds and press OK to conrm.
The recording symbol is no longer displayed on the screen.

If you are recording a call and the call is ended, you will be asked if you want to stop
recording.
RECORDING