Alcatel-Lucent 8262 Installation Manual

8262 DECT Handset - Alarms: Geolocation and notification
8AL90324ENAAed01 12/22
1.8 Configure the pull cord alarm (Pull cord)
 Access MENU.
 Access to Alarm settings menu (password).
 Alarm trigger
 Pull cord
 Mode: select the activation option.
o Call to number: an audio call is started with the predefined
emergency number. If no number is defined, there is no event.
o Alarm to server: the event is send to the server.
 Sett: set feature parameters.
o Location signal: send audio signal to locate the handset.
o Number: define emergency number.
If necessary, and in order to complete this configuration, make sure that the following parameters
are also configured:
o Alarm mode (mandatory)
o Notification server (mandatory)
o Prealarm time
o User delay
o Location Signal
o Inactive dialing time
o Smart beacon
1.9 Configure the live calls
Live calls are automatically made by the handset to the notification server. They are designed to
signal the server that the handset is under coverage and working.
 Access MENU.
 Access to Alarm settings menu (enter password).
 Location & Events
 Live
 Mode: select the activation option.
 Event to server: the event is send to the server.
 Sett: configure Live delay.
The default time delay is 90 seconds. The live delay is the interval
between two live signal message attempts to the notification server. Valid
entries are between 30 to 999 seconds.
 Live delay
Enter the time delay.
 Save

Alcatel-Lucent 8262 Specifications

General

Brand	Alcatel-Lucent
Model	8262
Category	Telephone Accessories
Language	English