Alcatel-Lucent 8262 - Onfigure the Parameter: Inactive Dialing Time; Smart Beacon; Coverage Warning

8262 DECT Handset - Alarms: Geolocation and notification
8AL90324ENAAed01 18/22
2.9 Configure the parameter: Inactive dialing time
Inactive dialing time: this parameter defines the time before the set can get in alarm condition
after dialing a number is interrupted more than the inactive dialing time value.
 Access MENU.
 Access to Alarm settings menu (password).
 Alarms Trigger
 Inactive dialing time
 Select the desired duration (off, 5, 10 or 15 minutes).
2.10 Configure the parameter: Smart beacon
This parameter defines if an event is sent to the server when the user enters in a Beacon area.
 Access MENU.
 Access to Alarm settings menu (password).
 Location & events
 Smart beacon
 Mode: select the activation option.
o Event to server: the event is send to the server.
 Sett: set feature parameters
o Proximity mode: send event when you entering and/or leaving the
area.
o Notification Sens: notification sensitivity.
o Send live or differ: send live notification.
2.11 Configure the parameter: Coverage Warning
When the alarming mode is active and the coverage warning activated, the phone will display a pop
up screen asking for acknowledgment when the phone goes out of the coverage area. As long as the
phone is out of coverage, this pop up screen will be displayed unless acknowledged.
 Access MENU.
 Access to Alarm settings menu (password).
 Location & events
 Coverage Warning
 Yes / Off
Activate/ deactivate the feature.