Alcatel-Lucent 8262 - Hange the Alarm Password

8262 DECT Handset - Alarms: Geolocation and notification
8AL90324ENAAed01 15/22
 Normal alarm / Urgent alarm / Very urgent alarm
Select the ring to associate to the normal, urgent or very urgent alarm
(choice 1 to 4).
 Normal alarm vol. / Urgent alarm vol. / Very urgent volume
Select the volume to associate to the normal, urgent or very urgent alarm
(choice 1 to 4).
 Alarm ringing mode
Select ringing mode (off, beep, vibrate and/or ring).
2.2.3 Configure the forced ring of incoming alarms
You can configure the forced ring of the incoming alarms sent by the OXE notification server. When
a call from the alarm server is received, the handset always rings regardless of the handset
settings.
 Access MENU.
 Access to Alarm settings menu (password).
 Location & Events
 Notification ring
 Forced ringing
 Yes
2.3 Change the alarm password
This password allows access to the alarms settings menu and to end the location audio signal on a
set.
 Access MENU.
 Access to Alarm settings menu (password).
 Location & Events
 New alarm passwrd
 Enter current password.
 Ok
 Enter new password.
 Ok
 Confirm new password.
 Ok