8AL90324ENAAed01 2/22
TABLE OF CONTENTS
1 CONFIGURATION DOCUMENTATION 4
1.1 INTRODUCTION 4
1.2 OVERALL SOLUTION ARCHITECTURE 4
1.3 FEATURE CONFIGURATION WITH ALARM SERVER 8
1.4 CONFIGURE EMERGENCY CALL 10
1.5 CONFIGURE THE “MANDOWN“ ALARM (MANDOWN) 10
1.6 CONFIGURE THE “NO MOVEMENT“ ALARM (NO MOVEMENT) 11
1.7 CONFIGURE THE ALARM SHOCK (SCHOCK) 11
1.8 CONFIGURE THE PULL CORD ALARM (PULL CORD) 12
1.9 CONFIGURE THE LIVE CALLS 12
1.10 CONFIGURE THE KEY EVENT CALLS 13
1.11 CONFIGURE THE STATUS CALLS 13
2 ALARMS SETTINGS 14
2.1 CONFIGURE THE ALARM MODE (ALARM MODE) 14
2.2 CONFIGURE THE ALARM SERVER (NOTIFICATION SERVER) 14
2.3 CHANGE THE ALARM PASSWORD 15
2.4 CONFIGURE THE LOCATION AUDIO SIGNAL. 16
2.5 CONFIGURE THE ALARM ACKNOWLEDGEMENT: ALARM ACK 16
2.6 CONFIGURE THE PARAMETER: DELAY TIME 17
2.7 CONFIGURE THE PARAMETER: PREALARM TIME 17
2.8 CONFIGURE THE PARAMETER: USER DELAY 17
2.9 CONFIGURE THE PARAMETER: INACTIVE DIALING TIME 18
2.10 CONFIGURE THE PARAMETER: SMART BEACON 18
2.11 CONFIGURE THE PARAMETER: COVERAGE WARNING 18
2.12 CONFIGURE THE PARAMETER: PREFERRED LOCATION 19
2.13 RESET ALL ALARM PARAMETERS 19
To Next Page
Loading...
Need help?
General
