Alcatel-Lucent 8262 - Charging Your Telephone Battery

8262 DECT Handset - Alarms: Geolocation and notification
8AL90324ENAAed01 14/22
2 Alarms settings
2.1 Configure the alarm mode (Alarm mode)
Depending on the selected mode, the message will contain reduced or full location data. Mode
selection is performed once for all the alarm features.
 Access MENU.
 Access to Alarm settings menu (password).
 Location & Events
 Notification server
 Alarm mode
 Select the “Enterprise“, “Office“ mode.
2.2 Configure the alarm server (Notification server)
2.2.1 Configure the feature
 Access MENU.
 Access to Alarm settings menu (password).
 Location & Events
 Notification server
 Server 1 settings
 Number
 Enter the prefix to access the trunk line.
 Fill up the identification codes of the different incoming alarm levels sent
by the alarm server.
o Normal alarm ID
o Urgent alarm ID
o Very urgent alarm ID
o HF Answer mode ID
o Server ID check
If necessary, configure the parameters of: Server 2 settings.
2.2.2 Configure the rings of incoming alarms
 Access MENU.
 Access to Alarm settings menu (password).
 Location & Events
 Notification ring