8AL90324ENAAed01 9/22
Location Signal: this menu allows activation and configuration of the location audio signal
(LAS) feature of the phone. The LAS is triggered by the handset if the menu is activated on
the handset. LAS allows the handset to generate audio signal when an alarm was triggered
by handset user. It sends back LAS activation to the handset (if configured in alarm server).
The First Aid team is able then to locate handset rapidly as LAS creates an audio signal in
handset loudspeaker.
Alarm ack (on screenacknow. / Alarm with ack): this parameter allows the administrator
to require or not an on screen acknowledgement or an alarm acknowledgement.
Location & Events:
The Wireless Handset is able to send regular information or event triggered to an Alarm server.
Status/Live: this parameter allows you to activate or deactivate the live calls, status calls.
Alarm mode: this parameter allows you to select Enterprise or Office mode.
Key event: Key event calls are also initiated by users when pressing particular keys on the
numeric keypad.
Smart beacon: this parameter defines if an event is sent to the server when the user enters
in a Beacon area.
Notification server: these parameters allow you to enter access prefixes to manage access
to the interface used by the alarm server. First enter the main access prefix then enter a
second or backup prefix if necessary. These parameters relate to normal, urgent and very
urgent alarms as well as automatic Handsfree mode and server identification check. The
server configuration is made once and applies to all features.
Live delay: this parameter allows you to enter the time between two signal messages sent
by the handset.
Notification ring: this menu allows association of ring tones and volumes to alarm levels
sent by the alarm server (normal, urgent, very urgent).
Coverage warning: this menu allows activate an alarm (popup) when the phone goes out of
the coverage area.
Preferred location: this parameter allows defines the preferred mode for location (DECT or
Beacon).
Reset settings: this feature allows resetting of all alarm parameters.
New alarm password: this feature allows definition of a new alarm password to access the
alarm settings menu.
To Next Page
Loading...
