Alcatel-Lucent 8262 User Manual

8262 DECT Handset
8AL90323ENAAed01
14 /60
2.3 Charging your telephone battery
2.3.1 Charging the battery on a dual charger
The dual charger is provided for charging the handset and for a spare battery when at a desk.
Put your phone on its support. Plug the USB cable into the 5V socket of the desktop charger. Plug the other
end of the USB cable into the AC/DC adaptor. Plug the AC/DC adaptor into the mains power supply.
You can configure how the handset behaves when it is installed on the charger using the settings menu.
Refer to the chapter on configuring your telephone.
Use a spare battery pack
 Unlock the cover of the spare battery compartment and lift it up.
 Place a spare battery pack in the top back slot, behind the handset, with the charging contacts
down.
To remove the spare battery, push down on the button near the compartment.
2.3.2 How to dock your phone with the USB cable
Open the USB cover of your phone.
Plug the USB cable into the USB port of your phone. The other end of
the USB cable can be plugged into the AC/DC adaptor or into a
computer USB port.

Alcatel-Lucent 8262 Specifications

General

Brand	Alcatel-Lucent
Model	8262
Category	Telephone Accessories
Language	English