Alcatel-Lucent 8262 User Manual

8262 DECT Handset
8AL90323ENAAed01
51 /60
8.2 Registering the telephone on other systems
The telephone can be registered on several systems (maximum of 4).
Note: the input is usually reserved for use with your main ALE International system. You can select the
other inputs to register the telephone under another system (ALE International or other system).
8.2.1 To make a new registration, when the telephone has already been registered on one
or more systems, proceed as follows:
1. Prepare your system for registration (see the system installation manual or consult your installation
manager).
2. When the system is ready:
 Access MENU.
 Settings
 System settings
 Enter the PIN Code.
 Apply.
 Register
 Select a system.
 Enter PARK code.
 Apply.
 Enter access code.
 Apply.
 Select Power mode.
 Legacy Mode:
 Yes / No
Call from encrypted system to un-encrypted system is accepted (yes) or rejected (no).
Launch subscription.
 If the registration operation runs correctly (Subscription accepted), the telephone is ready for use, and
the radio coverage icon appears.
 If the registration operation has not been successful, the station proposes launching the subscription
again.
 Depending on the type of system concerned, registration may require one or more additional operations
on the system.

Alcatel-Lucent 8262 Specifications

General

Connectivity	DECT
Protocols	GAP
Speakerphone	Yes
Bluetooth	No
Loudspeaker	Yes
Frequency Band	1.9 GHz
Range	Up to 300 meters outdoors
Battery Type	NiMH
Compatibility	Alcatel-Lucent
Function	Make and receive calls, access phonebook, messaging
Connection	DECT