8AL90323ENAAed01
8.2.2 Selecting your DECT system
Your telephone can be programmed to function on 4 different DECT systems.
Select the desired input (the chosen option is indicated by the radio button with a central
dot).
The selection is retained even after switching the telephone on/off. The selection of a specific system
(SYSTEM...) forces operation on a specific system. This selection must be changed if one wishes to
change system. Selecting ' Auto. select ' enables the telephone to connect automatically when it enters a
system coverage zone. If the systems programmed in the telephone have common coverage zones, the
telephone selects the first system found.
To Next Page
Loading...
