Using WebView Configuring the Switch With WebView
OmniSwitch 6250/6450 Switch Management Guide June 2013 page 11-9
To configure a feature in WebView, click on the feature icon in the toolbar on the left side of the screen.
The first page displayed is the Home Page. Each configuration feature in WebView has a Home Page and
a number of configuration pages. The Home Page provides an overview of the feature and its current
configuration. The configuration pages are used to configure the feature.
Accessing WebView with Internet Explorer Version 7
When using Windows Internet Explorer Version 7 (IE7) browser software to access WebView with
HTTPS, the following certificate warning message is displayed:
Click “Continue to this website (not recommended)” to continue the browser session. A certificate error
message, similar to the one shown below, appears at the top of the WebView browser window.
At this point, you can decide to do one of the following:
•
Ignore the certificate error message and log into WebView. By doing so, the certificate error message
always appears at the top of every WebView browser window; or,
•
Follow the steps below to install the Alcatel-Lucent self-signed certificate in the Trusted Root Certifi-
cation Authorities store. This clears the certificate error message.
1
Click on the certificate error message. A “Certificate Invalid” popup window displays.
2
Click on “View Certificates” at the bottom of the “Certificate Invalid” popup window. A “Certifi-
cate Information” popup window displays.
3
Click on the “Install Certificate” button at the bottom of the “Certificate Information” window. This
step launches the Certificate Import Wizard.
4
Click the “Next” button to continue with the Certificate Import Wizard process. The “Certificate
Store” window displays.
5
Select “Place all certificates in the following store” and click on the “Browse” button. This displays
a list of certificate stores.
To Next Page
Loading...
