SNMP Trap Information SNMP Traps Table
OmniSwitch 6250/6450 Switch Management Guide June 2013 page B-27
alaSaaCtrlOwnerIndex—An owner name to identify entries in the table. This is currently not supported and its
value will always be the string 'USER'.
alaSaaCtrlTestIndex—A unique name to identify the entries in the table. The name is unique across various
SNMP users.
alaSaaEthoamResultsTestRunIndex—Identifies the row entry that reports results for a single Eth-LB/DMM
test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
alaSaaCtrlLastRunResult—The result of the latest SAA test iteration: 1 - Undetermined, 2 - Success, 3 -
Failed, 4 - Aborted.
alaSaaCtrlLastRunTime—The date and time at which the last iteration of the SAA was run..
170
alaSaaMacIterationCompleteTrap
alaSaaCtrlOwn-
erIndex
alaSaaCtrlT-
estIndex,
alaSaaMacRe-
sultsTestRun-
Index,
alaSaaCtrlLas-
tRunResult,
alaSaaCtrlLas-
tRunTime
system This trap is sent is sent when a
MAC SAA iteration is
completed.
alaSaaCtrlOwnerIndex—An owner name to identify entries in the table. This is currently not supported and its
value will always be the string 'USER'.
alaSaaCtrlTestIndex—A unique name to identify the entries in the table. The name is unique across various
SNMP users.
alaSaaMacResultsTestRunIndex—Identifies the row entry that reports results for a single test run. The value
of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
alaSaaCtrlLastRunResult—The result of the latest SAA test iteration: 1 - Undetermined, 2 - Success, 3 -
Failed, 4 - Aborted.
alaSaaCtrlLastRunTime—The date and time at which the last iteration of the SAA was run.
171
aaaHicServerChangeTrap aaaHSvrIpAd-
dress,
aaaHSvrCurrI-
pAddress
aaa This trap is sent when the active HIC
server is changed from.to primary.
aaaHSvrIpAddress—The HIC/Rem/WebDL server's IP address.
aaaHSvrCurrIpAddress—The current active HIC server's IP address.
172
aaaHicServerUpTrap
aaaHSvrIpAd-
dress,
aaaHSvrRole,
aaaHSvrName
aaa This trap is sent when at least one
of the HIC servers comes UP.
aaaHSvrIpAddress—The HIC/Rem/WebDL server's IP address.
aaaHSvrRole—The HIC Server’s role.
aaaHSvrName—The HIC Server’s name.
173
alaLldpTrustViolation
agentalreadyex-
istonport ,
agentalreadyex-
istonotherport,
chassisidsub-
typemissmatch
aip This trap is sent when there is an
LLDP Trust Violation, and gives
the reason for the violation.
No. Trap Name Objects Family Description
To Next Page
Loading...
