SNMP Traps Table SNMP Trap Information
page B-26 OmniSwitch 6250/6450 Switch Management Guide June 2013
164
alaTestOamRxReadyTrap
alaTestOamCon-
figTestId,
alaTestOamCon-
figSourceEnd-
point,
alaTestOamCon-
figTestIdStatus
bridge This trap is sent to the NMS once
the switch with Analyzer or
Loopback Role is ready to
receive test traffic. Once this trap
is received, the Generator is acti-
vated for generating test traffic.
alaTestOamConfigTestId—A unique name to identify the entries in the table.
alaTestOamConfigSourceEndpoint—The the local or transmitting switch. For bidirectional test, this also iden-
tifies the analyzer switch.
alaTestOamConfigTestIdStatus—The test status (not started, running, stopped, ended).
165
alaTestOamTestAbortTrap
alaTestOamCon-
figTestId
bridge This trap is sent to the NMS from
the switch, if the test is aborted
during takeover.
alaTestOamConfigTestId—A unique name to identify the entries in the table.
166
Reserved
167
Reserved
168
alaSaaIPIterationCompleteTrap
alaSaaCtrlOwn-
erIndex,
alaSaaCtrlT-
estIndex,
alaSaaIpResult-
sTestRunIn-
dex,
alaSaaCtrlLas-
tRunResult,
alaSaaCtrlLas-
tRunTime
system This trap is sent when an IP SAA
iteration is completed.
alaSaaCtrlOwnerIndex—An owner name to identify entries in the table. This is currently not supported and its
value will always be the string 'USER'.
alaSaaCtrlTestIndex—A unique name to identify the entries in the table. The name is unique across various
SNMP users.
alaSaaIpResultsTestRunIndex—Identifies the row entry that reports results for a single OAM test run. The
value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
alaSaaCtrlLastRunResult—The result of the latest SAA test iteration: 1 - Undetermined, 2 - Success, 3 -
Failed, 4 - Aborted.
alaSaaCtrlLastRunTime—The date and time at which the last iteration of the SAA was run.
169
alaSaaEthIterationCompleteTrap
alaSaaCtrlOwn-
erIndex,
alaSaaCtrlT-
estIndex,
alaSaaEthoam-
ResultsT-
estRunIndex,
alaSaaCtrlLas-
tRunResult,
alaSaaCtrlLas-
tRunTime
system This trap is sent is sent when a
Eth-LB or Eth-DMM SAA itera-
tion is completed.
No. Trap Name Objects Family Description
To Next Page
Loading...
