Alcatel-Lucent OmniSwitch 6450 - Page 350

SNMP Traps Table SNMP Trap Information
page B-22 OmniSwitch 6250/6450 Switch Management Guide June 2013
120 dot3OamNonThresholdEvent dot3OamEventL
ogTimestamp
dot3OamEventL
ogOui
dot3OamEventL
ogType
dot3OamEventL
ogLocation
dot3OamEventL
ogEventTotal
dot3-oam This trap is sent when a local or
remote non-threshold crossing
event is detected. A local event is
detected by the local entity, while
a remote event is detected by the
reception of an Ethernet OAM
Event Notification OAMPDU
that indicates a non-threshold
crossing event.
dot3OamEventLogTimestamp—The value of sysUpTime at the time of the logged event.
dot3OamEventLogOui—The OUI of the entity defining the object type. All IEEE 802.3 defined events (as
appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of
0x0180C2. Organizations defining their own Event Notification TLVs include their OUI in the Event Notifica-
tion TLV that gets reflected here.
dot3OamEventLogType—The type of event that generated this entry in the event log. When the OUI is the
IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFramePe-
riodEvent(2), erroredFrameEvent(3), erroredFrameSecondsEvent(4), linkFault(256), dyingGaspEvent(257),
criticalLinkEvent(258).
dot3OamEventLogLocation—Indicates whether this event occurred locally (local(1)), or was received from
the OAM peer via Ethernet OAM (remote(2)).
dot3OamEventLogEventTotal—The total number of times this event has resulted in a notification.
121 alaDot3OamThresholdEventClear dot3OamEventL
ogTimestamp
dot3OamEventL
ogOui
dot3OamEventL
ogType
dot3OamEventL
ogLocation
dot3OamEventL
ogWindowHi
dot3OamEventL
ogWindowLo
dot3OamEventL
ogThresholdHi
dot3OamEventL
ogThresh-
oldLo
dot3OamEventL
ogValue
dot3OamEventL
ogRunningTo-
tal
dot3OamEventL
ogEventTotal
dot3-oam This trap is sent when is sent
when a local or remote threshold
crossing event is recovered.
No. Trap Name Objects Family Description