SNMP Trap Information SNMP Traps Table
OmniSwitch 6250/6450 Switch Management Guide June 2013 page B-31
198 aluLicenseManagerLicenseExpired aluLicensedAp-
plication
aluLicenseTim-
eRemaining
license
manager
This trap is sent when the value
of aluLicenseTimeRemaining
becomes 0 (zero) for a demo
licensed application. This notifi-
cation is applicable only for tem-
porary licenses. This trap can be
utilized by an NMS to inform
user about an application license
expiration.
aluLicensedApplication—String displaying the application for which this license is valid.
aluLicenseTimeRemaining—Number of days remaining to evaluate this demo license.
199
-
225
Reserved
226 configSaveSucceededTrap configMgrTraps-
Group
configMgrTra-
pReasonGroup
configSaveSuc-
ceededTrap
configSaveSuc-
ceededTrapRea-
son
config
manager
This trap is sent from existing
Configuration Manager Task
when configuration is saved.
Existing socket between the
Configuration Manager and the
Trap Manager is used for sending
trap. SAM is informed of the
changes in switch configuration
with SNMP traps allowing.
Switches are polled when the
configuration is saved.
This is done by checking the
configuration file periodically
using CLI, SNMPor Webview.
The trap can also be raised using
"debug trap generate"
command, “write memory”,
"write memory flash-synchro",
and "copy running-config
working" commands
configSaveSucceededTrap—Generated when the saving of configuration finishes without errors.
configSaveSucceededTrapReason—Specifies the reason of trap for successful execution of write memory
command.
configMgrTrapsGroup—Collection of Traps for Configuration Manager.
configMgrTrapReasonGroup—Configurations saved successfully by write memory command.
No. Trap Name Objects Family Description
To Next Page
Loading...
