Alcatel A3 - Page 37

37
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi
icon will appear on the status bar whenever the tablet detects an
available wireless network within range. The following steps activate the
notification function when Wi-Fi is on:
• Drag down the Quick settings panel and touch to access Settings.
• Touch Wi-Fi. Then touch and the Network notification switch
to activate/deactivate this function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your
preference.
• Drag down the Quick settings panel and touch to access Settings.
• Slide down, then check Add network option
• Touch Add network, enter the name of the network and any required
network information.
• Touch CONNECT.
When successfully connected, your tablet will be connected automatically
the next time you are within range of this network.
To forget a Wi-Fi network
The following steps prevent automatic connections to networks which
you no longer wish to use.
• Turn on Wi-Fi, if it’s not already on.
• In the Wi-Fi screen, press the name of the saved network.
• Touch FORGET in the dialogue that opens.
To connect your tablet to other Wi-Fi Direct devices
When Wi-Fi is on, you may activate Wi-Fi Direct and connect the tablet to
other Wi-Fi Direct devices to exchange data.
• Drag down the Quick settings panel and touch to access Settings.
• Touch Wi-Fi. Then touch and select Advanced > Wi-Fi Direct from
Wi-Fi screen.
• To make your tablet more recognisable, touch RENAME DEVICE, enter
a name, and touch OK to confirm.