7
Charging the battery
To charge your tablet, connect the charger to your tablet and mains
socket.
• When using your tablet for the first time, charge the battery fully
(approximately 5 hours).
You are advised to fully charge the battery ( ). Charging status is
indicated on screen while the tablet is powered off. The charging animation
shows the status.
To reduce power consumption and energy waste, when battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.
Adapter shall be installed near the equipment and shall be easily accessible.
1.2.2 Power on your tablet
Hold down the Power key until the tablet powers on, unlock your tablet
(Slide, PIN, Password, Pattern) if necessary and confirm. The Home screen
is displayed.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your tablet. Store this
information in a safe place when not in use.
Set up your tablet for the first time
The first time you power on the tablet, you should set the following
options:
• Select the tablet's language, then touch GET STARTED.
• Insert SIM card or touch SKIP to get to the next step.
• Select a Wi-Fi network to connect, or touch Don’t use any network for
setup to get to the next step.
• Touch NEXT to go through Google services
To Next Page
Loading...
Need help?
General
Weight and Dimensions
