Alcatel A3 - Getting connected; Connecting to the Internet

36
6 Getting connected
To connect to the internet with this tablet, you can use 2G/3G/4G
networks or Wi-Fi, whichever is most convenient.
6.1 Connecting to the Internet
6.1.1 2G/3G/4G
To create a new access point
A new 2G/3G/4G network connection can be added to your tablet with
the following steps:
• Drag down the Quick settings panel and touch to access Settings.
• Touch More > Mobile networks > Access point names
• Touch to add a new APN.
• Enter the required APN information.
• When finished, touch and touch Save to confirm.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
• Drag down the Notification panel and touch to access Settings.
• Touch More > Mobile networks and activate/deactivate Data roaming.
• When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection.
6.1.2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your tablet is within
range of a wireless network. Wi-Fi can be used on your tablet even without
a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch on Quick settings panel to get to Settings.
• Touch Wi-Fi.
• Touch the switch to turn on/off Wi-Fi. When Wi-Fi is activated,
the detailed information of detected Wi-Fi networks is displayed in the
Wi-Fi networks section.
• Touch a Wi-Fi network to connect. If the network you selected is
secured, you are required to enter a password or other credentials (you
may contact your network operator for details). When finished, touch
CONNECT.