Alcatel LINKZONE - Device Setup Steps; Connecting in Wi-Fi Mode

10
How to use Mobile Hotspot’s Whitelist
Funcon
Your mobile hotspot is equipped with a “whitelist” funcon
that will allow you to secure your network’s privacy. When this
funcon is acvated, only users that have been granted access
by adding user’s MAC address will be able to connect to the
network. When the primary user deacvates this feature, all
other users will be allowed access to network via Wi-Fi and
use of correct password.
1. Log in the web User Interface.
2. Select Sengs -> Wi-Fi Sengs -> Allowed Devices.
3. The switch is o by default, all user input correct password
can access.
4. Aer open the whitelist funcon, you need to know the
user client’s MAC address and add to the list, the format is
XX:XX:XX:XX:XX:XX. You can add up to 10 devices if they
are all going to connect, because the Wi-Fi chip can only
support 10 devices connected at the same me.
5. If you would like to remove a users in the whitelist. They
will no longer be allowed to connect to the network, click
the buon, and then click Yes to remove.