Alcatel LINKZONE - Safety and Use; SAR Compliance; Usage Precautions

2
Geng to Know Your Mobile Hotspot
Power key
LED indicator
WPS key
USB jack
LED Descripon
Part Descripon
Power key
Hold the “Power” key for 3 seconds to
power the device on/ o.
WPS key
Hold “WPS” key for 3 seconds to acvate
the WPS funcon. Once acvated, the
Wi-Fi LED indicator will ash every two
seconds. If the network is not accessed
within 2 minutes device will automacally
exit WPS mode.
LED indicators
Displays signal, Wi-Fi, SMS, and baery
charge status.
Charging /
USB Port
Use the USB jack to charge your device
and connect your device to the client via
the USB cable.
Reset
Hold both “Power” and “WPS” keys
simultaneously for 6 seconds. All LED
indicators will ash blue 4 mes to
indicate that the device has been reset
to factory mode.
Reboot
Hold “Power” key for 10 seconds to
restart device.