Alcatel SMARTFLIP - Page 58

58
During SAR testing, this is set to transmit at its highest
certied power level in all tested frequency bands, and
placed in positions that simulate RF exposure in usage near
the body with the separation of 15 mm. Although the SAR is
determinedatthe highest certied powerlevel, the actual
SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the power
output.
The exposure standard for wireless employs a unit of
measurement known as the Specic Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted using standard operating
positions accepted by the FCC with the device transmitting
at its highest certied power level in all tested frequency
bands.
The FCC has granted an Equipment Authorization for
this model device with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
SAR information on this model device is on le with the
FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccidaersearchingon:
FCC ID: 2ACCJN031
This device is HAC M4/T4 compatible. Reference ANSI C63.19
(2011).
FCC Hearing Aid Compatibility (HAC)
On product, go to Settings > Device > Device Information >
Legal information > Hearing Aid Compatibility (HAC)
Or go to https://us.alcatelmobile.com/accessibility-
compliance/hearing-aid-compatibility/ and search for FCC
ID 2ACCJN031.