EasyManua.ls Logo

AlcoSense Lite 2 - Understanding Test Results

AlcoSense Lite 2
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
LO
Less than 0.1‰BAC
Zero or Trace Alcohol
There is either no alcohol in the sample or
such a small amount it is negligible. The
reading is well below the legal drink drive
limit.
Alcohol present,
but under the limit
you set
Alcohol Present - DO NOT DRIVE
Your are below the limit you set in the
breathalyser but you have alcohol in your
system. Your reading is displayed on the
screen.
Above 2.0‰BAC
Close to or above
the limit set in the
breathalyser
DO NOT DRIVE. The sample’s alcohol level
is above 2.0‰BAC and is outside the reading
range of this device.
DO NOT DRIVE. You are close to or over the
drink drive limit you set in the breathalyser.
Note, the unit will display the don’t drive
symbol from 20% below your chosen limit.
Breath flow error
Either the pressure you blew at was too
variable or you did not blow for long enough.
Take a deep breath before blowing and blow
out at a consistent pressure like you’re taking a
sigh until it stops beeping (6-7 seconds). If you
continue to experience problems please call us.
Error in Reading
Either the breathalyser did not detect your
breath as the pressure was too low, or you
did not blow into the breathalyser within
10 seconds of it starting to say blow on the
screen. If you still experience problems after
several attempts please contact us.
ScreenDescription Explanation
Understanding the Results

Related product manuals