EasyManuals Logo

ALDI 1956 User Manual

ALDI 1956
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
16V Lithium-ion Cordless Drill
AFTER SALES SUPPORT
(toll free)MODEL No.: CDT214XA • 05/2019 • 1956
e-mail: info.aldi@positecgroup.com
AUS
18
1300 889 028
AUS
Forward/reverse switch
NOTE: You can only change the direction of rotation of the drill/driver using the
forward/reverse switch (5) when the trigger (7) is NOT depressed.
This switch will allow you to change the direction of the motor while the trigger
switch is not depressed.
Drill/driving uses the forward mode. The reverse mode is intended for the removal of
screws and assisting to remove jammed drill/driver bits.
When the forward/reverse switch (5) is in the middle position, the drill is in the lock
position and will not function.
Adjustable torque
This drill/driver is equipped with 21 torque settings plus 1 x drill setting.
The torque settings are controlled and adjusted by the torque setting collar (2).
When using the drill/driver for drilling
1. When using the drilling function the torque control has
no eect to the output of the drill.
The drill function is used when using the drill to
drill holes in metal, non ferrous material, wood, plastic
and similar materials.
Rotate the function selection collar so the symbol
of the drill bit aligns with the triangular indicator on
the top of the drill housing (Fig I).
Inserting and removing bits
This drill/driver has a keyless chuck, which means that a
chuck key is not needed to
secure a bit in the drill/driver.
1. Open the chuck (1) by unscrewing it in an anti-
clockwise direction, holding the drill/ driver as shown
(Fig J).
Do this suciently enough to allow the drill/ driver bit
Operation
OPEN
CLOSE
J.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALDI 1956 and is the answer not in the manual?

ALDI 1956 Specifications

General IconGeneral
BrandALDI
Model1956
CategoryDrill
LanguageEnglish

Related product manuals