16V Lithium-ion Cordless Drill
AFTER SALES SUPPORT
(toll free) MODEL No.: CDT214XA • 05/2019 • 1956
e-mail: info.aldi@positecgroup.com
AUS
21
1300 889 028
AUS
Operation
Accessories
Maintenance
Side Belt Clip
1. The side belt clip (4) is used to assist to clip the tool to your waist belt while
working. To install, insert the assembly screw through the belt hook screw hole
(Fig K), and using a Philips head screwdriver (not supplied), tighten the screw by
turning in a clockwise direction (Fig L).
NOTE: The belt clip (4) can be assembled onto either side of the drill
Carry Strap
A carry strap (13) is included
on the drill and is already
tted for convenience.
To maintain capacity, recharge the battery every two months. Store only fully charged
batteries.
They should therefore be recharged from time to time. The place of storage must be
dry; the ambient temperature must not fall below 0°C or rise above 45°C.
CAUTION! Electrical and battery operated units that no longer work should not
be disposed of in the household waste! They are to be collected separately, in
accordance with your local waste disposal regulations.
ATTENTION! Batteries must be removed from battery powered tools and disposed of
separately in accordance with relevant waste battery regulations.
Batteries must never be disposed of with domestic waste!
Please discard power tools no longer usable at a local collection point.
Collection and disposal of packaging materials separately by types complying with
local rules and regulations. For details, please contact your local council.
K. L.
To Next Page
Loading...
