16V Lithium-ion Cordless Drill
AFTER SALES SUPPORT
(toll free)MODEL No.: CDT214XA • 05/2019 • 1956
e-mail: info.aldi@positecgroup.com
AUS
20
1300 889 028
AUS
Operation
• Keep the drill/driver bit sharp.
• Reduce pressure, as the drill/driver is about to break through the item being
drilled/drivered.
LED work light
When the unit is switched on, the LED work light (6) also comes on to ensure better
vision and to make working in dark areas more safe.
The working light goes out when the On/O switch (7) is released.
CAUTION! LED is laser class 1!
Do not look directly into the laser as this may result in damage to the eyes.
Chuck replacement
The chucks of reversible drill/drivers are always xed by a screw with a lefthand
thread. The screw, which is located in the centre of the chuck, must be removed
before the chuck can be removed. To remove the screw, turn it in a clockwise
direction. The chuck can now be removed by unscrewing it anti-clockwise. If you have
trouble removing the chuck take the drill/driver to your nearest authorised service
centre for chuck replacement.
CAUTION. Always ensure that the drill/driver is switched o and the battery pack is
removed before making any adjustments.
To Next Page
Loading...
