ALDI 44268 - Installation and Adaptor Details; Connecting Outlet Adaptors

1100W Garden Pump
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. XKJ-1109PE • 1/2018 • 44268
(toll free)
AFTER SALES SUPPORT
(toll free)
1100W Garden Pump
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. XKJ-1109PE • 1/2018 • 44268
12 13
Connecting the outlet adaptors to the Garden Pump,
then to the water supply.
This garden pump is supplied with two water outlet ttings.
One of the adaptor ttings (10 or 11) must be used on the pressure
outlet (5) when setting up and using this garden pump (Fig D).
DO NOT purchase any other outlet tting and attempt to t into the
pressure outlet (5) of the garden pump as this will damage the pumps
operational sensor.
The following detail is a guide to some basic assembly applications as there
are numerous dierent combinations which can be assembled, depending
on the various applications.
D.
1100W Garden Pump Representation of typical
installation layout (Fig C)
Plug into the mains power using, in conjunction with, an RCD
(Residual Current Device) as suggested.
* This gure is indicative due to the variation of applications/use.
Pressure Outlet
(Max height of 46m)
Where water is to
be transferred to
.
Where water is to be transferred from.
Max pumping
height 46m
Max
suction
depth
7m
Intake Valve
Intake Port
(Min of 150mm* under water)
C.