2nd Time (T2)
This function sets the number
of hours the 2nd time should differ
from the current time.
UNITS
This function determines the units
of measure in which values will be
displayed:
• MET – metric in metres
(m, km, km/h) and grams (kg).
• IMP – imperial with foot (ft),
miles (m, m/h) and British pound (lb).
• NAU – nautical with sea miles (nm),
knots (kt) and British pounds (lb).
Automatic lap (AUTO LAP)
In workout mode, the laps covered
can be counted and recorded in lap
times. Mark the beginning of each lap
by tapping the LAP/RESET key
11
.
With the “AUTO LAP” function, laps can
automatically be generated according to
the distance covered.
1. Set the desired distance after which a new
lap will be marked (e.g. 1 km).
Possible values: 0.1 to 5.0 km/m/nm.
2. Tap the VIEW key
10
.
To Next Page
Loading...
