14
Electrical connections
Electrical connections
CAUTION!
Risk of injury!
There is a risk of injury from accidental operation of the
foot control.
− Once you have fi nished working or before you start
maintenance, always turn off and unplug the machine.
1. Plug the connector on the power cable supplied into the socket
9
on the machine.
2. Plug the mains connection into the mains socket.
3. Switch the sewing machine on with the power switch
10
. The
power switch turns both the sewing machine and the sewing
light on.
Use only the HKT72C foot pedal supplied with the product.
Controlling the sewing speed
The sewing speed is controlled by the foot pedal.
The sewing speed can be changed by applying more or less
pressure to the foot pedal.
Attaching and removing the table extension
The machine is supplied with an attached work table.
− The table extension is removed by pushing it carefully to the
left.
− To attach the table extension, carefully place the table
extension on to the machine and push it to the right until it
audibly clicks into place.
To Next Page
Loading...
