15
Preparatory work
Accessories box
The accessories box
14
is integrated in the table extension.
− To open the box, fl ip the table extension cover forwards,
providing access to the parts inside.
Preparatory work
Fitting the cotton reel
TIP
Most cotton reels have a notch to hold the thread in place after use.
Make sure that this notch is pointing downwards in order to ensure
that the thread will run evenly and will not catch.
− Pull the cotton reel holder
5
up out of the machine until you
hear it click into place.
− Place the cotton reel on the cotton reel holder.
TIP
When using very fi ne thread which tends to knot, it is advisable
to put the cotton reel on the rear holder and to pass the thread
through the front holder (Fig. I).
− In this case, thread the cotton (A) through the eye (B) in the
front cotton reel holder to regulate the winding action (Fig. II).
I
A
B
II
To Next Page
Loading...
