19
Preparatory work
5. Then pass the thread between the tension discs of the upper
thread tension regulator
19
.
Pass the thread under the front thread guide and upwards,
which automatically pushes up the inner guide spring.
Unlike the tension discs on most sewing machines, the tension
discs on the upper thread tension regulator are not visible so it is
important to check very carefully that the thread is between the
tension discs and is not running through the machine in another
place.
6. Then insert the thread from right to left in the hook of the
thread take-up
1
.
Turn the hand wheel
8
, if necessary, in order to raise the thread
take-up
1
.
7. Bring the thread back down towards the needle, taking it
through the internal thread guide
16
.
8. Pass the thread through the thread guide on the needle holder
28
.
9. Finally take the thread through the eye of the needle.
1
16
28
To Next Page
Loading...
