Operation
31
Spooling
Should the thread on a bobbin
3
run out or if you would like to use another thread,
you can wind bobbins quickly and easily using the sewing machine.
1
10
1. Pull the spool holder
10
all the way out and place a spool of thread on it (see Fig. 1).
2
3
2. Take an empty bobbin
3
and pull the thread through one of the small holes
from the inside out, leaving approx. 10cm protruding (see Fig. 2).
3
14
15
3. Release the bobbin winder
15
from the handwheel
14
by pressing the bobbin
winder and simultaneously turning the handwheel anti-clockwise (see Fig. 3).
To Next Page
Loading...
