23
2-in-1 Chainsaw with Telescopic Pole
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: N
o
. 705156 · 03/2021 · GCS250F
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL: N
o
. 705156 · 03/2021 · GCS250F
Operation
1. Switching on and o
WARNING: Check the voltage and current
supply: The voltage and current supply
must comply with the ratings on the
product plate.
For switching on the chainsaw:
1. To start the chainsaw, connect the power plug to
the mains power outlet socket.
2. Press the lock-o button (14), then fully press the on/o switch (2) and hold
in this position. The lock-o button (14) can now be released (Fig H).
For switching o the chainsaw:
1. Release the on/o switch (2), the chainsaw will stop.
2. Disconnect the power plug from the mains socket when not in use.
Chainsaw applications
WARNING: Do not use the chainsaw if you are tired or under the
inuence of drugs, alcohol or medication.
WARNING: If the chain is stuck during operation, release the on/o
switch immediately, then remove the chainsaw from the cut.
WARNING: If you are unfamiliar with the following cutting
procedures, ensure you fully read and understand the instructions
1
2
H
G2
G3
G4
To Next Page
Loading...