ALDI FERREX GCS250F - Pole Saw Noise and Vibration

37
2-in-1 Chainsaw with Telescopic Pole
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: N
o
. 705156 · 03/2021 · GCS250F
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL: N
o
. 705156 · 03/2021 · GCS250F
Pole saw:
Noise Information
A weighted sound pressure L
pA
= 87 dB(A)
K
pA
= 3 dB(A)
A weighted sound power L
wA
= 100.40 dB(A)
K
wA
= 0.76 dB(A)
Wear ear protection.
Vibration Information
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value:
a
h
= 1.2 m/s
2
(Front handle) Uncertainty K = 1.5 m/s²
a
h
= 1.7 m/s
2
(Rear handle) Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared noise emission value
have been measured in accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared noise emission value
may also be used in a preliminary assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the
power tool can dier from the declared value depending on the ways
in which the tool is used especially what kind of workpiece is processed
dependant on the following examples and other variations on how the tool
is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in
good condition.
The tightness of the grip on the handles and if any anti vibration and noise
accessories are used.
And the tool is being used as intended by its design and these instructions.