ALDI FERREX PRO FBLM-1000 E1 - Storage and Transport; Troubleshooting; Disposal and Recycling

AUS
GS650F <Chapter>
AUS
<Chapter> GS650F
Tex tTex t
XI. Storage and transport
Storage
Store the equipment and accessories out of children‘s reach in a dark and dry place at
above freezing temperature. The ideal storage temperature is between 5 and 30 °C.
Store the machine in its original packaging.
Transport of the lawn mower in vehicles
• Clean the machine before transport.
• Secure the lawn mower su󰀩ciently so that it cannot slip and cause damage or inju-
ries during transportation.
XII. Troubleshooting
Troubleshooting
The table shows potential failures, their possible cause and removal options. How-
ever, if you are unable to remove the problem, contact a professional to assist you.
Fault Possible cause Remedy
Loud while
running,
machine
vibrates
heavily
• Screws are loose
• Blade fasteners are loose
• Blade is unbalanced
• Check screws
• Check blade fasteners
• Replace blade
Motor does
not start
• Motor terminals
disconnected
• Machine standing in high
grass
• The lawn mower housing is
clogged
• Safety plug is not inserted
• Battery is not correctly
inserted
• Have it checked by a customer
service workshop
• Start motor on shorter grass or
already mowed area; change
cutting height if necessary
• Clean housing so that the blade
can run freely
• Insert the safety plug
• Remove the battery and reinsert
The drive
motor does
not start
• Motor terminals
disconnected
• Machine standing in high
grass
• The lawn mower housing is
clogged
• Safety plug is not inserted
• Battery is not correctly
inserted
• Have it checked by a customer
service workshop
• Start motor on shorter grass or
already mowed area; change
cutting height if necessary
• Clean housing so that the blade
can run freely
• Insert the safety plug.
• Remove the battery and reinsert
Motor
performance
drops
• Grass too tall or damp
• The lawn mower housing is
clogged
• Blade badly worn
• Battery performance
decreasing
• Correct the cutting height
• Clean the housing
• Replace the blade
• Check the battery performance
and charge the battery if
necessary
XIII. Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit.
The raw materials in this packaging can be reused or recycled. The equipment and its
accessories are made of various types of material, such as metal and plastic. Never
place defective equipment in your household refuse. The equipment should be taken
to a suitable collection center for proper disposal.
If you do not know the whereabouts of such a collection point, you should ask in your
local council o󰀩ces.
AUS
FBLM-1000 E1 Troubleshooting/Disposal and recycling
AUS
Storage and transport/Troubleshooting FBLM-1000 E1
AFTER SALES SUPPORT
29

1300 855 831

support@scheppach.com.au
MODEL: FBLM-1000 E1 PRODUCT CODE: 706547 09/2021
28
AFTER SALES SUPPORT
 support@scheppach.com.au

1300 855 831
MODEL: FBLM-1000 E1 PRODUCT CODE: 706547 09/2021