14
AFTER SALES SUPPORT
support@scheppach.com.au
1300 855 831
MODEL: HM80L PRODUCT CODE: 60120 04/2018
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
AUS
Safety regulations HM80L
– Do not use any faulty or damaged connection cables.
– Do not use any electric tool on which the switch cannot be switched on and
off.
21 ATTENTION!
– Exercise elevated caution for double mitre cuts.
22 ATTENTION!
– The use of other insertion tools and other accessories can entail a risk of
injury.
23 Have your electric tool repaired by a qualied electrician
– This electric tool conforms to the applicable safety regulations. Repairs may
only be performed by an electrician using original spare parts. Otherwise
accidents can occur.
ADDITIONAL SAFETY INSTRUCTIONS
1 Safety precautions
– Warning! Do not use damaged or deformed saw blades.
– Replace a worn table insert.
– Only use saw blades recommended by the manufacturer which conform to
EN 847-1.
– Make sure that a suitable saw blade for the material to be cut is selected.
– Wear suitable personal protective equipment. This includes:
– Hearing protection to avoid the risk of becoming hearing impaired,
– Respiratory protection to avoid the risk of inhaling harmful dust,
– Wear gloves when handling saw blades and rough materials. Carry saw
blades in a container whenever practical.
– Wear goggles. Sparks generated during work or splinters, chippings and
dust coming from the device can lead to loss of eyesight.
– Connect a dust collecting device to the electric tool when sawing wood. The
emission of dust is inuenced, among other things, by the type of material to
be processed, the signicance of local separation (collection or source) and
the correct setting of the hood/guide plates/guides.
– Do not use saw blades made of high-speed alloy steel (HSS steel).
2 Maintenance and repair
– Pull out the mains plug before any adjustment or repair tasks.
– The generation of noise is inuenced by various factors, including the
characteristics of saw blades, condition of saw blade and electric tool. Use
saw blades which were designed for reduced noise development, insofar
as possible. Maintain the electric tool and tool attachments regularly and if
necessary, initiate repairs in order to reduce noise.
– Report faults on the electric tool, protective devices or the tool attachment to
the person responsible for safety as soon as they are discovered.
To Next Page
Loading...
