10
AFTER SALES SUPPORT
support@scheppach.com.au
1300 855 831
MODEL: HM80L PRODUCT CODE: 60120 04/2018
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
AUS
Layout/Scope of delivery/Intended use HM80L
a) 90° angle gauge (not scope of delivery)
b) 45° angle gauge (not scope of delivery)
c) Allen key, 6 mm
d) Allen key, 3 mm
e) Counter nut (90° adjustment)
f) Counter nut (45° adjustment)
g) Screw (mitre cut pointer)
III. Scope of delivery
1 x 8" Mitre Saw
1 x Clamping device (8)
2 x Workpiece support (9)
1 x Anti-tipper (10)
1 x Dust bag (18)
1 x Allen key 3 mm
1 x Allen key 6 mm
2 x Carbon brushes
2 x AAA Battery
1 x Instruction manual
1 x Warranty card
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, lm and small parts!
There is a risk of swallowing and suffocation!
IV. Intended use
The mitre saw is used to cut wood, materials similar to wood and plastics accord-
ing to the machine size.
The saw is not suitable for the cutting of rewood.
The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer will
To Next Page
Loading...
