00800 - 36 46 36 00
IRE
GB
Charging the rechargeable battery
The rechargeable battery takes approx.
8 hours to charge fully. However, you can
also use the shaver in mains operation
without charging the rechargeable battery.
1. Insert the 5V plug
8
in the socket for charging
6
on the bottom of the shaver.
2. Connect the AC adapter plug
9
in a properly
installed mains socket.
The mains symbol
12
on the handle illuminates
in red to indicate that the battery is charging.
Additionally, the battery symbol
11
flashes in green
as soon as the rechargeable battery is fully charged.
3. When charging the shaver, place it on a dry and level
surface.
Handling
Dry shave
We recommend a dry shave before you
wash. After washing, your skin is slightly
swollen. As a result, shavers are often unable
to reach the entire length of your beard hair
so the shave will be less thorough.
For a dry shave, follow the steps below:
1. Take the protective cap
1
off of the shaver.
2. Use the On/Off switch
5
to turn the shaver on.
To Next Page
Loading...
