00800 - 36 46 36 00
IRE
GB
3. Pull the shaver blades
3
straight up and out of
their brackets (see fig. I).
4. Dispose of the used shaver blades as described in the
chapter “Disposal”.
5. Mount the new shaver blades on the brackets.
6. Firmly mount the shaver head on the shaver until the
locking mechanism audibly locks into place
(see fig.E).
7. Place the protective cap
1
onto the shaver.
Your shaver is now ready for use again.
Storage
1. Switch off the shaver and clean all components.
Ensure all parts are dry before reassembling.
2. Store the shaver in a clean, dry area. We recommend
that you use the storage bag
10
for this.
3. Make sure the shaver and its accessories are not
accessible to children and animals.
To Next Page
Loading...
