00800 - 36 46 36 00
IRE
GB
Replacing wearable parts
Ordering wearable parts
You can order a new shaving foil unit and shaver blades
to replace worn ones.
To place your order, contact the address provided on the
order form.
Replacing the shaving foil unit
If the shaving foil unit is damaged, it must be promptly
replaced. We generally recommend that you replace the
shaving foil unit after 12 months of daily use.
1. Depress both release buttons
4
to release the
shaver head
2
(see fig. D).
2. Pull the shaver head up and off.
3. Push the hooks
14
on the left and right of the
shaving foil unit
16
into the shaver head frame
15
(see Fig. J and K)
4. Pull the shaving foil unit down and out of the shaver
head frame (see fig. K).
5. Dispose of the used shaving foil unit as described in
the chapter “Disposal”.
6. Place the new shaving foil unit in the shaver head
frame so that:
a) the guide braces inside the shaver head frame
15
extend into the guide grooves outside along the
shaving foil unit and
b) the recess in the shaving foil unit
16
is on the
same side as the recess inside the shaver head frame.
To Next Page
Loading...
