00800 - 36 46 36 00
IRE
GB
NOTICE!
Risk due to improper operation!
Improper handling of the shaver may result
in damage.
− Do not use any aggressive cleaners,
brushes with metal or nylon bristles,
sharp or metallic cleaning utensils such
as knives, hard scrapers and similar
items. They could damage the surfaces,
the shaving foil and the shaver blades.
Daily cleaning after a dry shave
1. Use the On/Off switch
5
to turn off the shaver.
2. Before cleaning, pull the 5 V plug
8
out of the
shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
4
to release the
shaver head
2
(see fig.D).
5. Pull the shaver head up and off.
6. Tap the shaver head gently over a sink to remove any
hair.
7. Without the shaver head mounted, use the On/Off
switch to switch the shaver on for approx.
5–10 seconds to dispel any hair from the shaver
blades
3
.
To Next Page
Loading...
