ALDI WORKZONE HBS20 User Manual

Overview 04
Utilisation 05
Pack contents/parts 06
Explanation of symbols 09
Introduction 10
Layout 11
Scope of delivery 12
Intended use 13
Safety regulations 14
Before starting the equipment 19
Attachment 19
Operation 24
Working instructions 24
Technical data 27
Transport 28
Cleaning and maintenance 28
Storage 29
Electrical connection 29
Disposal and recycling 30
Troubleshooting 31
Warranty details 33
Repair and refurbished goods or parts notice 34
BANDSAW
HBS20
Original operating manual
Vers.No. 1712220
ALDI guarantees that our exclusive brand products are developed to our
stringent quality specifi ca ons. If you are not en rely sa sfi ed with this
product, please return it to the nearest ALDI store within 60 days from the
date of purchase, for a full refund or replacement, or take advantage of our
a er sales support by calling the supplier’s Customer Service Hotline.
Made in China
WORKZONE® is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au
MODEL:
HBS20 04/2018
AFTER SALES SUPPORT
60339
 1300 855 831
 support@scheppach.com.au
5
YEARS
WARRANTY
Contents
User Manual

ALDI WORKZONE HBS20 Specifications

General

Brand	ALDI
Model	WORKZONE HBS20
Category	Saw
Language	English

Summary

Introduction

Layout

Scope of Delivery

Intended Use

Safety Regulations

Before Starting the Equipment

Attachment

Assembling the Saw Table

Instructions for attaching the saw table to the bandsaw machine frame.

Saw Band Tensioning and Alignment

Procedures for tensioning and aligning the saw band on the rollers for optimal performance.

Saw Band Guide Adjustments

Adjusting the saw band guide, support bearings, and guide pins for proper blade tracking.

Table Adjustments and Bottom Guide Pins

Adjusting bottom guide pins and tilting the saw table to the desired angle.

Operation

On/Off Switch Operation

Instructions for turning the bandsaw machine on and off using the switch.

Parallel Stop Usage

How to set and use the parallel stop for accurate cuts on the saw table.

Performing Angled Cuts

Steps for tilting the saw table to perform cuts at various angles.

Working Instructions

Technical Data

Transport

Cleaning and Maintenance

Storage

Electrical Connection

Disposal and Recycling

Troubleshooting

Warranty Details

Repair and Refurbished Goods or Parts Notice