4. Intended use
The compressor is designed to generate compressed air for compressed-air driven
tools which can be driven with an air volume of up to approx. 180 l/min (e.g. tyre
inator, blow-out pistol and paint spray gun). Due to the limited air output it is not
possible to use the compressor to drive tools with very high air consumption (for
example orbital sanders, die grinders and hammer screwdrivers).
The machine is to be used only for its prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade
or industrial applications. Our warranty will be voided if the equipment is used in
commercial, trade or industrial applications or for equivalent purposes.
5. Safety information
m Attention!
While using the machine some safety precautions must be observed to minimise
the risk of injuries and damage. Read the directions with due care. If you give the
equipment to any other person, give them these operating instructions as well. We
assume no liability for injuries or damages which are a results of non-compliance
with this manual and its safety notes.
GENERAL SAFETY INFORMATION
m Attention! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
The term “power tool” in the warnings refers to your mains operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Dis-
tractions can cause you to lose control.
AUS
Intended use / Safety information AIR FORCE
10
AFTER SALES SUPPORT
support@scheppach.com.au
1300 855 831
MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018
To Next Page
Loading...
Need help?
General
